View Full Version : PMI Screen
02-03-2010, 08:04 PM
Does any one know why my PMI screen on the Network Map when your in/on the AHU's screens doesn't want to "refresh itself" any more? All the CFM's or VFD's signals are not refreshing before your eyes after a couple of mins. like it use to. We have to refresh the screen ourselves. Version 12.04 using XP OS. It started happening about 4 weeks ago. Thank You for your input.
02-04-2010, 10:51 AM
After doing some 'confriguration of controller' and UNT's, upload/downloads. I rebooted our PC for the Metasys program and we are "now seeing the values change" on the screen for the AHU's, heating loop ect... on the screen! FYI:)
02-04-2010, 08:00 PM
Yep.... The good old three finger salute solves a lot of problems
02-04-2010, 09:30 PM
If you are connecting via ethernet, make sure in the power profile for the adapter that the computer cannot shut it down to save power.
02-05-2010, 08:52 AM
Your correct. Our PC runs 24/7. We do reboot it about once a month due to the total physical memory building up.:patriot:
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.