View Full Version : Trane Oil Filter
01-05-2010, 02:04 PM
Does anyone know the part number for a Trane RTHB300 oil filter? For some reason the local trane office doesn't seem to be sure which filter it is.
01-05-2010, 06:06 PM
You refering to the oil filter element?
01-05-2010, 06:19 PM
Yes.. The IOM says it is a spring loaded filter element.
01-05-2010, 06:45 PM
The reason for the confusion may be the oil filter type changed with a compressor design sequence after Feb 95 for the RTHB. The earlier RTHB with comp design seq AO had the replaceable cartridge type FLR0779, from comp design sequence 1D the oil filter was changed to the spin-on cannister type ELM1042. The 0-ring must also be ordered with the filter. If you can supply the chiller serial # it is easier to identify which part is correct.
01-05-2010, 06:47 PM
Serial numbers start U96... so they are obviously from 1996..
01-05-2010, 10:28 PM
They need the model and serial number off the compressor. They can figure it out from there.
01-06-2010, 08:19 AM
01-06-2010, 04:17 PM
Thanks for the help..
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.