View Full Version : Honeywell Truesteam Install Question
09-24-2009, 01:34 AM
I'm going to install a Honeywell Truesteam 9 gal. humidifier, my question is that on the supply plenum where I want to mount it there is only 15" from the steam output tube to the top of the plenum duct, the installations manual says I need 24" and 4" or more all around which I have, will I have a problem with this clearance?
09-24-2009, 01:42 AM
If it does become a problem you will stuck with it cause you did not install to manufacturers spec. I believe the height requirement is so you get proper steam distribution in the duct, you might get condensation issues in the duct which could lead to a water leak.
09-24-2009, 06:18 AM
Judging by your other threads.
Your a home owner, and this is a DIY project.
Questions and discussions pertaining to HVAC for the home. No pricing, no DIY.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.