HZ322 with EWC MA-ND4 pow open/close actuators

[mikeinma]

I am replacing an older EWC NCM-300 zone controller with Honeywell HZ322 since we are upgrading to an American Standard two stage system with variable speed blower and the older NCM-300's don't have two-stage t-stat inputs (newer ones do).

I was wondering if anyone here has used the HZ322 with EWC MA-ND4 actuators. These are power open / power closed units and it seems like they should work fine.

Thanks,

Mike

[beenthere]

I haven't. But, the HZ322 can control those dampers.