View Full Version : Honeywell IAQ not keeping correct time
09-14-2009, 08:44 AM
My IAQ, less than a year old, is losing about 10 minutes a month to the correct time. Seems to be working ok otherwise but hard to tell with this stat. Should I ignore or have my installer change it out under warranty. I have not discussed this with the installer, wanted to run this by the pros first. Thanks!
09-14-2009, 02:39 PM
Change it. And check that it's getting power in addition to the batteries (that shouldn't cause it to loose time but will cause all kinds of other problems).
09-15-2009, 12:42 PM
Thanks, I will contact my installer, hope he agrees!
09-15-2009, 09:31 PM
the iaq does not have batteries if it is loosing time have it replaced the thermostat has a five year warranty you might have a 1 year warranty with the installer i would call them
09-15-2009, 09:47 PM
My IAQ has a lithium-ion battery.
09-16-2009, 08:39 AM
I think mine does too. Would you suggest changing the module as well as the stat or only the stat itself?
09-16-2009, 09:27 AM
I would leave that up to your contractor to determine.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.