View Full Version : Mitsubishi MXZ30TN2
berto 101
07-05-2009, 12:48 AM
I got stress again, this here mitsi has shut down (light flashing indoor) and no faults on the outdoor but, the reversing valve is clicking constantly every second or so. I pulled fuses to see if it resets but, still it keeps clicking.:(
anyone ever come across this problem???
DPeoples
07-05-2009, 12:55 AM
I got stress again, this here mitsi has shut down (light flashing indoor) and no faults on the outdoor but, the reversing valve is clicking constantly every second or so. I pulled fuses to see if it resets but, still it keeps clicking.:(
anyone ever come across this problem???
Sounds like a Bad solenoid...:confused:
berto 101
07-05-2009, 01:11 AM
I will go a little deeper on the troubleshooting side on monday, it got dark fast......
Its weird to say the least. Its a try zone (3) 9,000 btu indoor units R22
thanks for response............ dpeeps
berto
beenthere
07-05-2009, 07:40 AM
Sorry, this is not a DIY site. So we are not allowed to give out advise of this nature.
Since answering your question in the open Residential Forums would be posting instruction for DIYers that may read this post later.
If your in the trade, get your post count up to 15, and apply for Pro Membership.
Then use this link Apply for Pro Membership (http://hvac-talk.com/vbb/showthread.php?threadid=116113)
Once accepted, you have access to the pro tech forums. Where you can ask and get answers to technical questions.
Plus, you also have access to the Pro Educational Forums.
All of it is free.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.