Mark T
06-22-2009, 08:12 AM
I have an older refrigerator in the shop. It has a 2 wire 110 v plug.
From the case to ground I measure 56 v. The voltage is constant even if the compressor isn’t running.
I’ve turned the plug around in the outlet – no change. I’ve checked the wiring – no bare wires touching.
Any thoughts?
Thanks -
MT
From the case to ground I measure 56 v. The voltage is constant even if the compressor isn’t running.
I’ve turned the plug around in the outlet – no change. I’ve checked the wiring – no bare wires touching.
Any thoughts?
Thanks -
MT