View Full Version : Beer fridge emergency!!
cmajerus
05-20-2009, 10:42 PM
Who is the best supplier for beverage air parts (MN) compressor sh!t out on buddies beer fridge(with about 12 cases in it of course) condensing unit seems to slide out the back on a tray, are these a type that you are better off replacing the whole CU or just compressors (not much refer work since tech school M #mm14ge s#4363896 (coke cooler from a golf course)
Banner 1-800-621-4625 or Micro Matic 1-866-327-4159
jpsmith1cm
05-20-2009, 10:50 PM
As a certified beer professional, after repairs are completed, I will need to take all of the beer home for testing.
I will return all beer that is safe for consumption.
:D
Tiger93rsl
05-20-2009, 10:50 PM
Doe's it look like this?
http://bp2.blogger.com/_UyXsk2Bgrb0/SIVTPrz5IFI/AAAAAAAAAOo/9VqHntC0rX8/s400/Largest+beer+fridge.jpg
beachtech
05-20-2009, 10:53 PM
inless its under warranty, i would just get a comp from local supplier :)
the numbers on the compressor will lead you straight to a replacement :)
cmajerus
05-20-2009, 11:08 PM
As a certified beer professional, after repairs are completed, I will need to take all of the beer home for testing.
I will return all beer that is safe for consumption.
:D
Tried to drink enough so he could get it in a cooler, but just couldn't drink that much so fast:D
cmajerus
05-30-2009, 06:36 AM
changed the compressor the other day, cooling beer again:D weighed in the charge to factory, what is normal for suction pressure on a 134a refrigerator like this?
KB Cool
05-30-2009, 10:28 AM
Look for around 25 depending on how warm your box is. Maybe a little higher at start up and most likely lower as case temp drops. (18 or so) Your SH will tell you if its working right.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.