tsranga
04-30-2009, 03:47 PM
For a 2200 sq ft home with a single story, with heat loss of 46k BTU and cooling load of 30k BTU, I am going with a 2-stage furnace and a 3-ton coil with TXV. Will install condenser if required.
I would like to get a HRV for improving air quality, and optionally, a air cleaner, and a whole house fan.
Questions:
1. I already have panasonic exhaust fans at the bathrooms. Have not purchased an exhaust system for the kitchen yet. Can I get an HRV that will operate for the rest of the areas (excluding the bathroom)? Do I need a separate exhaust system for the kitchen hood?
2. I was recommended the Lifebreath HRV with TFP air cleaner. Do I need both HRV and TFP or just the HRV?
3. For zoning 3 zones, Honeywell EMM3 and MARD damper control system was recommended. Can I use the visionpro IAQ to control both the HVAC and HRV (since it has the dehumidifcation controls)? or do I need separate controls for HVAC and HRV?
I would like to get a HRV for improving air quality, and optionally, a air cleaner, and a whole house fan.
Questions:
1. I already have panasonic exhaust fans at the bathrooms. Have not purchased an exhaust system for the kitchen yet. Can I get an HRV that will operate for the rest of the areas (excluding the bathroom)? Do I need a separate exhaust system for the kitchen hood?
2. I was recommended the Lifebreath HRV with TFP air cleaner. Do I need both HRV and TFP or just the HRV?
3. For zoning 3 zones, Honeywell EMM3 and MARD damper control system was recommended. Can I use the visionpro IAQ to control both the HVAC and HRV (since it has the dehumidifcation controls)? or do I need separate controls for HVAC and HRV?