JACE2 AX Px Graphics HELP!

[AutoPilot]

Hey Guys,
I got myself into a jam. Our graphics guy is on extended leave and I just don't "Do Graphics". Can barley draw with crayons.

Can someone Please share with me some Px Graphics of Air Handlers and cooling only VAVs?

I know there is a way to Have 1 AHU Graphic that has links to 15 other AHU points with Px inclued, but I don't remember how to set this up.

JACE2 has the WEB ui installed and is on customer intranet. AHUs and VAVs are BACnet MS/TP and are virtual points (all working).

Executive secretaries and Department Heads will be logging on to change schedules and may need to adjust the spaces set on some VAV boxes.

Approx. 12 to 16 AHUs with about 10 to 20 VAVs on each AHU.

Any help on this would be greatly appreciated!

TIA
Auto

[Cagey57]

Can you do a screenshot of one of the "Points" screens for an AHU and a VAV. I don't know for sure but that JACE should be able to autogenerate a graphic.

[AutoPilot]

That's the problem. Our graphics guru uses a portable "hot drive" since he works from home. Of course he has it with him. So I don't even have something to start with.

Typical AHU will have Supply and return temperatures with static pressure, cooling valve position etc.

Main thing is a button link to a schedule and vav zone set-point adjust.

Thanks for your help!
Auto

[Cagey57]

It the JACE accessable via the internet ?

Are you familar with ord's and hyperlinks ? If so you may be able to make this work, if not you got problems bigger than we can deal with on the forum.

(Do not post the web address here if it is.)

[viceman]

KitPxHvac in your palette has all the basic components to make
ahu and vav graphics.

[freddy-b]

or just grab his fancy stuff from a backup station he has already done.

[iwantmore]

If you are a dealer I would suggest calling the people you bought it from. They are your first support.

[MelbourneEngg]

u need to create a new Px file. then you can drag and drop the images of AHUs, VAVs. Temp Sensors etc from the KitPxHvac onto it. Now browse the points in the nav bar under the config\drivers section of your station and pull them to the px page.