PDA

View Full Version : Second Stage Saga



wildwire
04-19-2009, 09:26 PM
Heat Pump York YZE 03611C
Furnace York YP8C080B12MP11A
Coil York MC42B3Xh1A
Stat Honeywell Visionpro

The heat pump runs in second stage far too often. It does not seem to transfer to first stage until the amibient outdoor temp. rises to about 12 Deg. C (53 F.)

Will moving the switch point jumper from 45 to 35 alleviate this problem? BP set at 35 and LTCO at 25.

jrbenny
04-19-2009, 10:21 PM
It might.

jrbenny
04-19-2009, 10:21 PM
It might not.

beenthere
04-19-2009, 10:23 PM
If its not wired wrong. It might.

Are you setting back your thermostat.

What does your contractor say about it being in second stage too much.