Reinstalling HvacPro

[incontrol]

I didn't like all the MTools junk that was previously installed on my last computer but I did use HvacPro. I have 2 Mtools5 CDs but the only Hvacpro I see is a patch not the program. Is Hvacpro on here and where? Looks like maybe something under ctool. Can I just install only that? I don't remember the password.

[NickDeal]

You can reinstall MTools and then apply the patch. HVACpro is not stand alone in the MTools CDs. You can choose not to install any of the other programs when you reinstall MTools.

[Cagey57]

There are several variations of the MTOOLS CD, older ones (pre 5.00) usually had a single distribution for the US. The later (Newer) versions 5.3/5.4 (HVACPro 8.06-8.08) may have multiple folders (directories) for different parts of the world. On the most current 5.4.2 (Mtools that is) HVACPro is in a directory named Naasia. When you launch the startup.exe in that directory then clik on Configuration tools you get the option of selecting/deselecting which components to install.

8.04, 8.05 and 8.08 have/need patches.

Password ? What password are you refering to.

My email in my profile if you need patch for 8.04 or 8.08

Kelly