View Full Version : C-line Hobart dishwasher float kit
02-10-2009, 11:00 AM
I don't normally work on dishwashers,
However I would like to know if anyone knows how to change out the small magnetic floats in a Hobart dishwasher. #00-122674 float kit.
02-11-2009, 06:59 AM
Thread moved to Commercial Food Service and Equipment.
You might get responses from here.
Just In Time
02-11-2009, 11:02 AM
what model hobart? lx30? lx30I?
02-11-2009, 08:31 PM
it attaches with a c clip and a hook......small flat screwdriver to pop off the clip is all you need....5 minutes or so
02-11-2009, 10:23 PM
I didn't want to tear it up, not knowing how to change them.
I will try the small screwdriver and see if I can pry the C-clip out of one.
Thanks again for the response to my question.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.