Honeywell Series Pro 8320 Light

[Tchild]

I've got a Honeywell 8320 Pro and the light behind the face plate currently comes on for only Emergency Heat. My questions, 1) Is their only one light? 2) Can I wire it up to light when the backup (AUX) heat comes on? 3) If their is a second or flashing capability of the light , I would like to have it indicate when the 2nd stage of the HP is engaged. I had this setup on my last Robertshaw thermostat which had 2 lights. I really don't need a light when Emergency is engaged because I manually engaged it and already know it is running.

Tim

[Airmechanical]

I've got a Honeywell 8320 Pro and the light behind the face plate currently comes on for only Emergency Heat. My questions, 1) Is their only one light?
short answer, yes there is only 1 light!

2) Can I wire it up to light when the backup (AUX) heat comes on?
a technician could


i can't elaborate on how to wire it due to site rules



.

[Tchild]

I figured it out, just ran a jumper over to "L".

Tim

[Airmechanical]

I figured it out, just ran a jumper over to "L".

Tim


god job figuring it out



.