What things are with your computer? (RANT)

[sysint]

When I was onsite I always had a min set of tools with my PC. And I ALWAYS had cables, crossover... etc.... Here is where I'm going with this -- I always had my NULL MODEM CABLE. <end rant>

[poochz]

I still carry a NULL SERIAL CABLE (for iLons/Routers/Controllers etc). I used to call it a null modem cable, but haven't plugged in to a modem in 12+ years..people still use those things? :)

I don't modulate/demodulate any more... :D

poochz

[digo]

Do you wish to replace your null modem cable with this? :D
http://store.wcscnet.com/cgi/display.cgi?item_num=HDWBTRS232
+
http://store.wcscnet.com/cgi/display.cgi?item_num=HDWNULLMODDB9

Don't forget the 499&#189; ohm resistors and a couple of terminal screwdrivers in that bag.

[Chris_Worthington]

Do you wish to replace your null modem cable with this? :D
http://store.wcscnet.com/cgi/display.cgi?item_num=HDWBTRS232
+
http://store.wcscnet.com/cgi/display.cgi?item_num=HDWNULLMODDB9

Don't forget the 499½ ohm resistors and a couple of terminal screwdrivers in that bag.

I do, can you send me one for Xmas??? :D

[orion242]

I'll second that.

Anyone try them out? What's the range in the real world, ie block walls?

[crab master]

Screwdriver(s), serial to RS-232b, serial to rollover, crossover, thumb drive(s), btw - I need a null modem cable - didn't need one until I forgot the password I put in some LIP's, so I had to borrow one. Verizon wireless usb modem.

But more importantly I have a lot more tools on my truck! :D

BTW - SYSINT did you get my PM?