Reliable VAV controller and AX

[seewll]

I had to remove some Reliable VAV controllers, will not go into reasons, but they are Bacnet...Right?
Can I pull them into a Jace or SoftJace? Do i need special software to set address or do they have a default of device 1 if not already configured, they were stand alone. I would like to play with one in AX to see what I can do with it. Looks like a nice controller BTW.

[justjohnson]

Reliable controllers are software addressed. Meaning you need their Setup tool to address them or use Reliable software in RC-Toolkit called M-Set. Out of the box, though, they come default as MAC address 124.

[seewll]

Reliable controllers are software addressed. Meaning you need their Setup tool to address them or use Reliable software in RC-Toolkit called M-Set. Out of the box, though, they come default as MAC address 124.Thanks, I am going to try to pull one in to a soft jace sometime just to see how they work. These boxes were running stand alone.