View Full Version : Technical Specs For TAPPAN
10-17-2008, 07:46 PM
Hi, Working on a TAPPAN Gas furnace with the following info:
M/N: L1RC 100D-16B
Anyone have any technical spec on this particular model? I am looking for the rating of the inducer pressure switch... Thanks in advice
10-17-2008, 08:35 PM
Sorry, nothing that detailed online on the dealer site. Best I could do is Nordyne's part # of 632445.
Have to call tech support Monday.
10-18-2008, 11:35 AM
Thanks, I was hoping I didn't have to call, well we can always hope for the best :)
10-18-2008, 11:53 AM
The pressure is printed on the switch.
10-18-2008, 12:08 PM
I just ooked up the model. The inducer puts ot -90"wc there abouts. (igot a lot of them in the field). You should be able to work with that.
10-20-2008, 12:44 AM
thanks for the reply, do you mean -9" W.C. or -90" W.C? its probably the latter, but making sure...:D
10-20-2008, 09:53 AM
Just checked the anal inspection records for that model it's atlest-9.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.