PDA

View Full Version : Adding an Ethernet card to a Soft Jace


ddcfreek
09-25-2008, 02:09 PM
Has anyone done this to have bacnet/ip on a separate network just like a 201 or 600 can? Does it work?
digo
09-25-2008, 04:13 PM
Has anyone done this to have bacnet/ip on a separate network just like a 201 or 600 can? Does it work?

Yes this can be done. The technical term for this is usually referred to as a multi-homed setup. You specify which network card to bind to when setting up bacnet/ip network. Remember to check your firewall exception list (UDP port 47808)

http://www.topwebhosts.org/articles/setup-multihomed-host.php
misternorth79
09-25-2008, 07:30 PM
Easy upgrade. As digo states, just make sure you have BAC0 open on your firewall and all should be good.