PDA

View Full Version : Mitsubishi Heavy Industries (MHI) Centrifugal Chiller



cklee
08-22-2008, 10:22 AM
Hi all, my name is CK from Singapore. I was wondering does anyone here interested to know more about MHI chiller from Japan.

I would say at this moment MHI chiller is currently the highest efficiency chiller in the market using R134a gas.

Do drop me any message and i'm happy to share more with you guys.

Tech Rob
08-22-2008, 04:53 PM
I would be very interested in reading more about this.

rotaryfrk
08-22-2008, 05:17 PM
I'm interested, email in profile.

flange
08-22-2008, 05:19 PM
Inerested? Yes can you provide a link. The only issue is that in many cases, the product is not available in the states for a year or two until it gets through the UL certification process. Would like to see it though.

freonrick
08-22-2008, 10:22 PM
http://www.mhi.co.jp/en/products/detail/centrifugal_chiller_introduction.html

cklee
08-24-2008, 09:05 PM
http://www.mhi.co.jp/en/products/detail/centrifugal_chiller_introduction.html

Hi freonrick, yes that's the link. Thank you. Attached ratings based on ARI for reference.

cklee
08-24-2008, 09:08 PM
Inerested? Yes can you provide a link. The only issue is that in many cases, the product is not available in the states for a year or two until it gets through the UL certification process. Would like to see it though.

Hi flange, thank you for your interest. MHI chiller is designed in accordance to JIS standard. What would need to be doen forthe UL certification?

Taicool
08-29-2011, 02:15 AM
Hi ckLee:
Sorry, I might not be the potential chiller buyer,
just because I recently worked on a Mitsubishi centrifugal chiller,NART 90E,
I need the IOM manuals for maintenance job,
I wonder if you can help on providing them?
Best regards

cklee
09-01-2011, 03:48 AM
Hi ckLee:
Sorry, I might not be the potential chiller buyer,
just because I recently worked on a Mitsubishi centrifugal chiller,NART 90E,
I need the IOM manuals for maintenance job,
I wonder if you can help on providing them?
Best regards

Hi Taicool, may i know where is the origin installed location of this chiller? Normally there will be a service agent in each country and they should provide the OMM to their customer.

I believed you are refering to annual maintenance which will basically include condenser tubes cleaning, replacement of driers and oil filter, replace lube oil etc.

I'm sorry i won't be able to send you the entire document but if you could provide more background i could scan the relevant ones for your reference.

best regards,
Ck Lee

york56
09-01-2011, 07:28 AM
Here is there web site look out York , Trane , Carrier , & McQuay

york56
09-01-2011, 07:33 AM
shttp://www.mhi.co.jp/en/products/category/centrifugal_chiller.htmlite Here is there website look out York , Trane , Carrier , & McQuay forgot the link on the previous post

Taicool
09-01-2011, 12:02 PM
Hi CK Lee:
I know who the dealer of MHI chiller is in Taiwan,
unfortunately, there is no way to get anything from them,
they even don't sell any parts to other company,
and that is why I am looking for another suppliers outside Taiwan,
anyway, still thanks for your concern.

Good luck!

Taicool
09-01-2011, 12:20 PM
Hi york56:
Thanks for providing the MHI's web site adress,
but there is no IOM manuals that I have been looking for,
it seems it is hard to get information from this conservative company,

I have read some of your post on HVAC-TALK forum,
from your title york56, I gusee you are or you were also a york employee,
After had worked for York-Taiwan for 18 years, I just quit last month,
of course I would feel sad , but if you finally found the the company has lost its original values, then it is not worthy to stay.

Best regards

klove
09-05-2011, 01:58 PM
Hi all, my name is CK from Singapore. I was wondering does anyone here interested to know more about MHI chiller from Japan.

I would say at this moment MHI chiller is currently the highest efficiency chiller in the market using R134a gas.

Do drop me any message and i'm happy to share more with you guys.

How about putting an e-mail address where you can be contacted in your profile? Thanks...

york56
09-05-2011, 06:59 PM
http://www.mhi.co.jp/en/products/category/centrifugal_chiller.html

Looks like at this time about all you can get off the web site is some performance data no real IOM's about there product at this time or at least that there willing to give to the technicians at this time:cheers:

Coming to a Chiller plant near you !

Taicool
09-06-2011, 10:41 AM
I just check my profile, the mail adress's been listed there.

Taicool
09-06-2011, 11:31 AM
Sorry, some mistakes!

cklee
06-04-2012, 01:21 PM
Hi CK Lee:
I know who the dealer of MHI chiller is in Taiwan,
unfortunately, there is no way to get anything from them,
they even don't sell any parts to other company,
and that is why I am looking for another suppliers outside Taiwan,
anyway, still thanks for your concern.

Good luck!

Hi Taicool, how have you been?
Have you had any luck on the Mhi chiller parts which you are looking for last year?

Last week i just dropped by Taiwan to promote the sale for Mhi cnetrifugal heat pump. Do you know any company who can do maintenance and service for this type of heat pump?

I will attached the brochure herein for your reference.

regards,
cklee