PDA

View Full Version : Need a York YCAL chiller manual


Tubes110
08-01-2008, 04:01 PM
Looking for an IOM manual for a York YCAL0070 chiller. The key is, it has to be for a 031-02550-000 Rev C microboard. The chiller came with the wrong manual!:mad:
Please let me know where I can get one. Don't say call JCI because the sales rep that sold the chiller, the sales application engineer who helped spec the chiller, and everyone else in the office was unable to find one.
Thanks,

Reuben
chillrdude
08-01-2008, 04:19 PM
The manuals that I have are form 150.62-NM1 (700) and Form 150.62-NM6 (103), I cant tell by looking thru them where it actually describes the micro software version it applies to. Which manual do you have? you are welcome to what I got, if you want it.
york56
08-02-2008, 04:52 AM
If you have the full M/N & type refrig. for Chiller I may be able to help.
maxster
08-02-2008, 07:58 PM
try in here at their site on chillers they lisi YCALS
Tubes110
08-04-2008, 09:41 AM
The manual I has is form 150.62-NM6(103). It says right on the cover below the picture of the chiller what microboard it is for.
I will look around here some more.
Thanks guys
Tubes110
08-04-2008, 11:09 AM
try in here at their site on chillers they lisi YCALS

Where exactly are you talking about?
maxster
08-05-2008, 05:31 PM
try www.york.com and go to commercial ....then chiller products they show 3 YCAL IOMs
Tubes110
08-06-2008, 10:34 AM
I don't know if its me but when I go to those pages they only list 1 PFD for a YCAL that is in the ton range of my chiller and is listed as R-22. It is for a Style D and my chiller is Style C. Also, they are Tech Guides, not IOMs.:confused:
Thanks for the help though.

Reuben
CerealKiller
01-22-2009, 03:47 PM
Probably too late for ya, but here is a link since I was looking for the same thing.

http://www.york.com/products/esg/servicelit/ywpubs/150.62-NM1.pdf
Tubes110
01-23-2009, 08:55 AM
Too bad I did not have this back in August. I finally go ahold of the correct goofball field tech who was able to add the extra MODBUS card and get the thing talking. I think they STILL have not delivered the correct manuals though! I hope the customer is holding their ground and not paying the last payment!
Thanks for the manual though!