static pressure tip

[glw1982]

I jut got my first static pressure tip, the Dwyer A-303. I just wanted to make sure I use it right. The tip points into the airflow right?

[Ed Janowiak]

Yes

[n-e-w Jerz!]

yep.

[beachtech]

Yes

which tips are the ones that you recommend mr.ed? i am about to order a few from my local j-mart. my last co supplied them, so i never paid attention to which ones i was using :rolleyes:

[weber]

Hey buddy watch where your aiming that thing.......:)


Into the airflow!

Beachy, thats the one I recommend you get for your 510.

[beachtech]

Hey buddy watch where your aiming that thing.......:)


Into the airflow!

Beachy, thats the one I recommend you get for your 510.

i am getting it today, well if anyone has it in stock :)

[model m-man]

Any benefit from the Dwyer tip over the tip's in the 510 kit Jim carries?

[twosticks]

Wow. I was taught (by a manufacturers service rep) that all I needed was a hole in duct and insert hose or cover the hole w/ hose for static pressure.
He even demonstrated by removing a screw and covering the hole.

[beachtech]

Any benefit from the Dwyer tip over the tip's in the 510 kit Jim carries?

far as i can tell that kit is dwyer tips and some vinyl tubing that can also be found at the home cheapo or lowes ;)

i got 20ft of tubing for lesthan 5 bucks and just ordered three tips from cc dickson and haven't spent 45 bucks yet :)

[beachtech]

Wow. I was taught (by a manufacturers service rep) that all I needed was a hole in duct and insert hose or cover the hole w/ hose for static pressure.
He even demonstrated by removing a screw and covering the hole.

that works too. but it is very important that the insertion be at the very edge of the duct and straight!! or your readings will be off!! i have done it this way for some time :)