PDA

View Full Version : 14 to 13



glacierman2
05-18-2008, 02:03 AM
can u install a 14 seer condensor with a 13 seer indoor coil? if not why? there couldn't be that much difference in the indoor coils could there?

Gunnery Sergeant Hartman
05-18-2008, 02:13 AM
It depends...
Is it an ARI rated match? If so, yes. If not, no.

dan sw fl
05-18-2008, 04:23 AM
can u install a 14 seer condensor with a 13 seer indoor coil? if not why? there couldn't be that much difference in the indoor coils could there?

No one should recommend a combination that can not be verified as an ARI match.

Why?
It is not really supported by the manufacturer.

beenthere
05-18-2008, 06:18 AM
Waste of money to do it. You won't get the efficiency your paying for from the condenser.
Possible you could get less then 13SEER.

bmathews
05-18-2008, 10:33 AM
You can't really make a broad statement that it won't work. It depends on the manufacturer. You need to check the ARI. A lot of times the coils will be the same for a 13 or 14 SEER.

beenthere
05-18-2008, 11:13 AM
Actually, the ID coil doesn't have a SEER rating.

BaldLoonie
05-18-2008, 11:29 AM
Very good, been. I figured it would be Robo that pointed that out!

beenthere
05-18-2008, 11:37 AM
Haven't seen him posting much, so I thought I'd stand in for him on this one. :)