View Full Version : Alerton, Envision display
05-07-2008, 07:48 AM
I have a client who wants to create new graphics in his Alerton system to integrate with an ALC system. Dose anyone have a copy of the Display Developerís Guide (LTBT-TM-DSPDV) to help expidite this process? He has the BACnet manuals.
05-09-2008, 08:58 PM
I have a copy of the display manuals. If you send me your email I'll send it to you in a PFD.
By the way, I have a client that has a ALC system and I am trying to learn how to move around the work station. Does anyone have a operators manual for ALC controls?
Shoot me a line if anyone needs Alerton Documentaion.
08-26-2008, 06:40 PM
can u email that to me.... please... email@example.com im workin on an evision bactalk and cant figure out how to open the humidifiers manually....their not opening... just stay at 0% open...
08-26-2008, 07:25 PM
>open the humidifiers manually
That sounds like rain, hope you have a hardwire high limit
08-27-2008, 10:08 PM
I have a customer that is having issues with their BACtalk v1.10A. They have no manuals for the system. can someone email me a copy of the manuals to firstname.lastname@example.org
when in the list of equipment, 2 units are labeled as if they are in the same loacation, (ie. Hallway) but they are on seperate floors and in diferent areas. it looks like the box that you enter the location of the equipment for each unit has the same device number even though they are seperate devices. i found this out by rightclicking on the box, then going to device info. so if i change the lable for one, i go to the other unit and the lable has changed there as well... hope that wasnt too confusing.. if anyone has any ideas on how i can split these up it would be appreciated.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.