Dedicated outdoor air units in iraq

[airprep]

I am looking for a model number and some info on some units that process 100% outdoor air by cooling and filtration systems units will be used at a Waster water treatment plant chemical storage area and main breaker room looking for info to purchase the right units found no information on internet, thanks for any info. Regards from iraq!:D:D

[little john]

you just need to figure your loads and requirements and start contacting manufacturers. many of them will have satisfactory equipment to meet your needs. you'll likely need to just oversize a bit to achieve the desired room temp.

the manufacturer will spell out for you what you'll need

[frigetater]

salute to you Ft. Stewart guys........

[airprep]

I have already performed the load calculation and humidity control points, but the whole problem is i do not have time to go through a dealer, contracting for the gonvernment in iraq everything has to be done yesterday i have a completion date june 29 and it takes no less than a month to receive proper equipment locally i haave to get model numbers and specs and then they have to find it through there own vendor so i kind of got my hands tied.

[crab master]

Vemar http://www.venmarces.com/

AAON http://www.aaonnet.com/Default.aspx

Hopefully these links help

Contact the manufacturer and make them do the work if they want to sell you the unit.

Thank you for your service to our country!

[dan sw fl]

I have already performed the load calculation and humidity control points, but the whole problem is i do not have time to go through a dealer,

contracting for the gonvernment in iraq everything has to be done yesterday

i have a completion date june 29
and it takes no less than a month to receive proper equipment locally

I have to get model numbers and specs and then they have to
find it through there own vendor , so i kind of got my hands tied.


ASK THE VENODR which Manufacturers HE REPRESENTS.

Equipment selection can be performed in an hour
by experienced an Application Engineer
if you have HAP or TRACE load calculation and
you know type of unit needed.

I.E. DX or chilled water, split or packaged, roof top or interior AHU.

http://www.trane.com/Commercial/LiteratureSearchList.aspx

Nearly all TRANE equipment can be found in literature from this link.

more specifically MUA

http://www.trane.com/Commercial/Uploads/Pdf/1025/packaged%20air%20handling%20products.pdf

or AAON



or Munters

http://www.munters.com/en/Munters-Corporate-Home/About-Munters/

http://www.muntersglobal.com/en/Global/


or perhaps CARRIER

http://www.commercial.carrier.com/commercial/hvac/technical_literature/1,3063,CLI1_DIV12_ETI7422,00.html


Send me (see my profile) the load calc ( in PDF format),
if you wish to for me to select a specific TRANE unit for you.
Locals may be able to provide TRANE or equivalent based on
the TRANE series/ model number.

THANKS for your service !

[Latitude]

Take a look at www.petra-eng.com
These units are made in Jordan with American Parts.
I went to some training on them a few weeks ago and they seem to be very well made.
I was just looking at there web site and they have units installed all over the Middle East.:D

[flange]

Petra units are nice, but the plant is subsidized by the government in case you were wondering....Munters/Deschammps make some really nice stuff.

[rowe25]

Hey Latitude. What part of the US are you from?