CODYKING
04-10-2008, 05:24 PM
I have a old Sharfen Buffalo chopper the safety lever came loose and busted the switch out and jerked all hte wires loose. It looks pretty simple but I'm having trouble on how to wire it back up. I have my incoming power 115 (2 wire with ground) I have 2 SO cords coming out of the motor 2 wire each (black and white) and a 25 micro cap. If I ohm between the withe on each cord I have 1 ohm and the blacks 5 ohms. So I'm assuming the black is my start windings and the white is my run. With the cap being 25 micro I'm also assuming it a run cap. But how to tie it all together is whats getting me. I don't see what takes it out of start to run. It's a old Sharfen S2 and I can't find a wiring diagram anywhere. Any help would be appreciated.:confused: