Older Honeywell Controls

[enthalpy gal]

Looking for some insight and troubleshooting information on a particular Honeywell control.
W7080a/W7081a.

[bustawrench1]

Try here...............


http://customer.honeywell.com/techlit/pdf/PackedLit/60-2512.pdf

[jayhawker]

See my post in the Controls section

[enthalpy gal]

yes i did thasks for the pdf. have you ever worked with these controls

[hvacker]

I have. They were orginally made by Ranco and Lennox multizones used them as did Trane.
I used to have a dial device that simulated a load to check on the staging. It was made by Ranco. Honeywell might still have them. Jumping the stages will show operation but won't tell anything about the control working. You really need to simulate the load.

[bustawrench1]

yes i did thasks for the pdf. have you ever worked with these controls

Yes.

[enthalpy gal]

can i simulate a load with resistor of a temperature value within the temperature sensors C7100B