PDA

View Full Version : Digi-cool 1200 gages


King Valve
03-22-2008, 09:38 PM
what manifold do you guys recommend using with the drsa 1200 or 1250 when it comes out? I'll go ahead and say money not being an issue because I like going for the best. :cool:
Reeferman
03-23-2008, 07:56 PM
The 1200 was made to connect directly to a Yellow Jacket Titan four valve manifold. It will connect to any other manifold using the 90 degree swivel fittings. However it looks much neater when on the Titan. Some like this manifold and some do not. It is what ever you prefer. The 1250 is the same digital except it has 2 temp probes and backlighting.
King Valve
03-23-2008, 09:41 PM
since they make that manifold for just about every type of refrigerant and i plan to get into commercial hvac, does it matter which one i pick? sorry if im being a pain, i just dont want to regret getting the wrong one. :o

im not sure if the differences in the manifolds are just the gage on the manifold or if there are seals or gaskets in the manifold specifically made for the designated refrigerant.
Reeferman
03-23-2008, 10:11 PM
What kind of work do you do and what kind of manifold do you have now?
King Valve
03-23-2008, 10:40 PM
im in school right now and im using Just Better gages. i intend on getting into commercial work rather than residential but i also want to get the gages while im in school so i can learn on them instead of figuring them out on the job. i think my class equipment really only uses 134a, 401a and 410a.
Reeferman
03-23-2008, 10:48 PM
I am sure there will be some that disagree but I have had good luck with the Titan manifold. If that is the way you go make sure it and the hoses are rated for 410a and you will be covered.

http://i125.photobucket.com/albums/p45/r404a/dad010.jpg

http://i125.photobucket.com/albums/p45/r404a/dad011.jpg
King Valve
03-24-2008, 01:59 PM
Makes sense, thanks alot! I appreciate the help. :)
HeyBob
03-24-2008, 03:19 PM
I have not been following this thread very well................so, you buy the Digi-Cool set up and install it on your existing manifold whatever brand it is? Correct?
tarheel_tech
03-24-2008, 06:40 PM
I have not been following this thread very well................so, you buy the Digi-Cool set up and install it on your existing manifold whatever brand it is? Correct?

Hey!......Bob!.....that is correct sir:D LOL!
HeyBob
03-24-2008, 11:35 PM
Hey!......Bob!.....that is correct sir:D LOL!


LOL............Thanks man! Oh yea, by the way, My dad is Mr. or Sir, I am just ........"Hey Bob"! :D
King Valve
03-25-2008, 12:17 AM
what about bob?
weber
03-25-2008, 12:27 PM
I personally like how they fit on to the titan manifold.

http://i296.photobucket.com/albums/mm198/WeberSteve/0324081717.jpg

But yes HeyBob, it can go on your exsisting manifold. But I dont like to lose one tool to gain another.
tarheel_tech
03-25-2008, 07:21 PM
Oh yea, by the way, My dad is Mr. or Sir

That is my responce when someone calls me Mr. or sir,funny.:D
beachtech
03-25-2008, 07:24 PM
we also say yes ma'am down here. now which would you like???
beachtech
03-25-2008, 07:25 PM
I personally like how they fit on to the titan manifold.

http://i296.photobucket.com/albums/mm198/WeberSteve/0324081717.jpg

But yes HeyBob, it can go on your exsisting manifold. But I dont like to lose one tool to gain another.

i think my YJ's look great. soon as i get the monies for the digi 1250's i already have a 4 valve titan waiting for them :D