View Full Version : York Screws...
02-04-2008, 04:07 PM
I am wondering what kind of information is available for a York Screw machine other than the supplied Installation, Operation and maintenance manual. I'd also like to know how to get any and all service bulletins for this machine.
What is the secret on getting my hands on this stuff so I can maintain operate troubleshoot and repair this machine better???
02-04-2008, 08:18 PM
it is to new publications are not up yet
02-04-2008, 08:18 PM
it is to new publications are not up yet for the net anyway
02-04-2008, 08:23 PM
I used to maintain a pair of YSCBCBS1CGA's and there were no manuals to be found anywhere at the site. I went to York's website, did some surfing around and found every single manual that was ever printed for that chiller, have you looked at York? I know their website has been a pain in the arse to navigate but, the info is there.
02-05-2008, 03:34 PM
the information is definetly out there...try www.hvacpartners.com you have to sign up but its worth it. if not check with your local York supplier they should have no problem getting them
02-05-2008, 04:49 PM
Ivandykeman, the link you posted seems to be a Carrier website.
I'm trying to gather information for York equipment, particularly a YCWS.
I've been looking at the JCI website but have not found anything other the information that I already have, which is somewhat helpful for familiarizing myself with the piece of equipment but I know there has to be better manuals available.
02-05-2008, 05:28 PM
Hope this helps you rotaryfrk http://www.york.com/products/esg/ServiceLit/library/default.asp
02-05-2008, 07:12 PM
yeah it actually is a carrier website..just got the membership today ..and after looking for a york on that website it didnt show anything but carrier equipment. sorry for the misdirection
02-06-2008, 08:29 AM
MrNYC, I am currently weeding through the link you provided. I've had some luck in the past with that website, but it seems to only provide information that I already have.
I'd like to find bulletins for my YCWS also. I've emailed JCI but I've received no response. SURPRISE SURPRISE!!!
02-06-2008, 09:05 AM
If the training center still exists in York, PA. Give them a call for the publication #'s. I remember (3) binders each for the chiller and solid state starter.
02-06-2008, 10:02 AM
How can I get the BULLETIN on york model YCWJ999RW
I need it urgently!!!!
Thanks in advance
02-14-2008, 03:36 PM
There are only two bulletins available on the YCWS.
1 - Replacement of DXS Compressor Motor Protection Circuit
2 - Improved Danfoss Solenoil Coil.
There are a couple information sheets out about updating EPROMs for slide valve issues at shutdown, minimum load controls, and freeze protection.
Publication number for the EPROM issue is 160.47-M2. The two bulletins (which York warranty should have fixed) are SB0083 and SB0056.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.