Broken Drill Bit for Orfice

[Blue King]

I just broke an orfice bit from my set. Does anyone know where I can just buy one and not the whole set? Mine are the hand type with the brass octagon handle

[MechAcc]

Go to

Anderson & Forrester (http://www.andersonforrester.com/products/gauging_sizing_tools/default.html)
they make the complete kits and offer individual bits as well.

[Blue King]

MechAcc, Thank you so much for the info. My supplier only carries the whole sets. I don't use these items very much anymore so purchasing a whole set is waste. But, even one missing from the set isn't worth a darn either. Thanks again.
B. K.

[marvin]

just bought a new set today. needed 5 & the price per bit
nearly gave me a heart attack. a % f are the best
have a couple sets of malco for emerg. though

[amickracing]

Look for your local machinist supply house.. they sell drill bits in # sizes, fractions and letters.. they'll cover your needs.. if not check out grainger or MSC supply or something

[contactor]

Sid Harveys. Ive replaced many.:)

[HeyBob]

Blue King, please review the forum rules before starting multiple threads on the same subject.

10. Do not double post or bump

Choose the correct category or section for your thread and put it in only one category. Also, if your thread has not received any new posts lately it will slide down the list, so be it. Do not post a reply just to bump it up the list.

Welcome to HVAC-Talk!

[operator]

amick is right

we use an indusrtial supply company, get the #drills and a set of pin chucks to hold them

CCS Industrials

[appltech1]

C. C. Dickson . Ive bought several for less than $3 each. 1-336-725-9371
Winston-salem N C