View Full Version : JCI FEC Sideloop
12-27-2007, 10:34 PM
Does anyone know or have an example of
a sideloop that uses an input (fan status)
to turn the PID state to OFF or control?
Also, using summer /winter status to change output
from Direct Acting to Reverse Acting?
Can it be done in a FEC or by using an NAE?
12-27-2007, 11:04 PM
If you build a standard fan program in CCT, it uses fan status to force the PID to zero...you might try using that as an example.
The summer/winter switch might be found by building a uni-vent program, although I've never checked.
If you're willing to build my .csv I'll build you a CCT program.....:D
I assume you have CCT? If not I can send you a basic program.
12-28-2007, 11:39 PM
I found it and I cannot attach, what is your email?
12-28-2007, 11:49 PM
I've added my email to my profile...just click on my name. :)
Thanks for your help!
12-29-2007, 12:28 AM
You have mail......
12-29-2007, 12:39 AM
DDC - are you 916 area code?
12-29-2007, 03:04 PM
12-30-2007, 09:03 PM
there's a company out here near Sacramento starts with ddc. was curious if perhaps we'd met.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.