Goodman Furnace

[ndiglo]

:confused:Goodman furnace showing code 5 "false flame". I have cleaned the flame rectifier and do not think it is causing the problem. Blower runs without any heat call from thermostat and the draft inducer runs as well. I am leaning towards a bad controller "Board". Any suggestions, I know there are many of you must have delt with this one... Thanks a bunch.

[amd]

Call a technician - it will be cheaper and safer than swapping out good parts.

[HeyBob]

From some of your other posts I think you are a technician. There is a link in my signature line to apply for professional membership. Apply, then once your status is changed you can ask this in the Professional Technical Forum.