Honeywell

[gifford888]

Anyone know how to disable the "Adaptive Intelligent Recovery" feature in a Honeywell TH8110u1003? Thank you! Gotta be one of the Advanced Feature codes but the manual does not give that out! :)

[Senior Tech]

the installers setup section.

[pecmsg]

Why disable it? That’s one of the best things they’ve done in a long time.

[BaldLoonie]

I've had a few complaints about how early it starts. These have been 2 stage units. One has started the furnace about 3 hours early and had the house up to temp about 90 minutes early. We'll swap that Monday and I'll ask for a less aggressive recovery too.

[docholiday]

If you are only setting back a few degrees, I would disable it too and set my time to come on 15 minutes earlier or so.

[gifford888]

Thank you -- got it in the install menu! - THANK YOU THANK YOU! The thermo is in the hallway -- all vents are closed in the entire upstairs zone except for the master bath -- I want it to come on ONCE a day -- for 15 minutes to warm master bath -- with recovery, it was coming on HOURS early and turning the bathroom into a Sauna!

[pecmsg]

-- all vents are closed in the entire upstairs zone except for the master bath --


By doing this you’ve upset the entire balance of your system. Go back and open all vents

[gifford888]

Can't do that... too much $$$ -- just need heat in the master bath first thing in the morning... worked GREAT this morning! Thanks again!@#!

[Gunnery Sergeant Hartman]

Can't do that... too much $$$ -- just need heat in the master bath first thing in the morning... worked GREAT this morning! Thanks again!@#!


Some people you just can't help...even for free.

[gifford888]

I was helped! Works great! What could possibly be the harm to the furnace?

[billva]

not enough airflow, possibly overheating furnace causing premature damage to heat exchanger.