Honeywell excel 50 controler

[desroches]

i have a few of these and i want to adjust the temp setting, anyone know the password that will get me into this part of the programming ?
or do i need the CARE software.

this is a link to the controler i am dealing with, i have read the user manual and the software manual. it gives the 4444 pasword but that doesnt let me adjust the temp.
any help would be apreacited
i was told by a honeywell tech to try 5555 but that was the same as 4444 as per programming parameters / settings




http://europe.hbc.honeywell.com/products/ecatdata/pg_xl50.html

[cyro]

The user manual does not give you the password.

You do not need Care.

You can do it from the keypad on the 50

It is done from Pseudo in the menu. You must first change from auto to manual then you can make the adjustment.

As for the password, I believe you should be in Pro's Forum

[desroches]

hey thanks alot i will try that tomorrow.

Yes, i should be in the Pros Forum.

might do that now

i will let you know how i make out tomorrow, i belive the pasword 4444 will get me in there, i have changed it from auto to manual already in order to clear alarms but i never really looked around alot when it was in manual mode.

[desroches]

I believe you should be in Pro's Forum

just applyed :P

[markj]

Make sure that you are changing setpoints and not the actual temp point. Have had that happen and it never works out well.

[desroches]

thanks, everything showed up soon as i put it in manual :D

now i just gotta change 56 more of them :P