Satchwell (TAC, Invensys) Sigma programming help

[Outrage]

Hi All,

I'm new over here and wondered if anyone could help me out with programming Satchwell Sigma?

I've managed to master most of the functionality and scripting but there are one or two items that i'm a bit in the dark about such as the rotation objects and differential objects.

By trade i'm a PLC/SCADA engineer but i've been thrown into using this at my new company with no prior knowledge or official training.

Also, if anyone has any PDF (Or other formats) of manual for this software that you can post or email i'd be much obliged.

Best Regards,

Lee Outram
Airport Engineer
Robin Hood Airport (Doncaster, Sheffield)
UK

[mbarson]

I stumbled across this web site a while back. It has the Workplace Tech manuals in pdf under controllers-field and alot of cut sheets that may be useful.

http://infonet.ibs.invensys.com/Extranet/Literat.nsf/Tech%20Lit%20-%20Current%20-%20Sigma?OpenForm&Start=1&Count=100&Expand=3&Seq=5