View Full Version : York screw machine grease
bobby m
02-28-2007, 09:48 AM
Does anyone know what type of grease is recommended for there toshiba motors(400 hp) YSDC Chiller
scott123
03-01-2007, 12:21 AM
Read the IOM
bobby m
03-01-2007, 06:00 PM
I did but it says to refer to motor mnf, specs which are gone. and on toshibas website i get manuf. grease specs. that i cant find,i'll just order it from york.
flemsteele
03-01-2007, 06:18 PM
I've used the Chevron SRI-2 grease. Make sure you dont mix grease. They all react differently. This can have adverse effects on the motor bearings.
heaviwall
09-30-2007, 01:23 PM
We use Polyurea grease as told to us from the factory
r404a
07-04-2009, 11:14 PM
Flem
is that the same type grease york suggests using on there frequency drive centrifugal motors?
r404a
york56
07-05-2009, 06:26 AM
This is the recomended grease for the different size motors , contaminated grease will shorten the life of the motor;)
klove
07-05-2009, 09:57 AM
Does anyone know what type of grease is recommended for there toshiba motors(400 hp) YSDC Chiller
Polyrex EM (unless you have a motor book with the chiller that specifies differently) 5000 frame Reliance used Texaco Premium RB lithium.
yorktek37
07-10-2009, 04:45 PM
if its green its polyrex ep-2. Polyrex EM will mix with EP-2 just fine. EM will mix with the others. EP-2 Wont. I think the EP-2 is better if that's all that it had in it.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.