View Full Version : Siemens Pinout
12-25-2006, 09:30 AM
Would anyone happen to know the Siemens MMI pinout? I'm trying to connect to a MEC thru Hyperterminal and don't have the Siemens cable. Am I correct that the settings are 9600 8-N-1; Flow Control None; Emulation Auto Detect? Thanks for the help.
12-25-2006, 10:56 PM
I figured it out, for those that may be interested
rj12 ---> db9
pin 1 ---> pin 2
pin 2 ---> pin 3
pin 5 ---> pin 5
Hyperteminal 19200 baud, 8-n-1, no flow control, vt100 emulation
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.