Greenheck MAU

[agross]

Hi, I'm wondering if anyone has any info on this unit.... the name plate didn't offer much information, and Greenheck is telling me the m/n and s/n are not good numbers.

This is exactly what the nameplate says:

Greenheck II Inc.
Kitchen Ventilator Systems
Schofield, Wisconsin

Fan Package
S/N F-1391-2 M/N FP-H-3024

Exhaust Fan
Volts 480 CYC. 60 PH 3
HP 2 AMPS 3.0

Supply Fan
Volts 480 CYC. 60 PH 3
HP 1 1/2 AMPS 2.4

I need a new blower wheel (which I believe to be a backward inclined centrifugal), bearings, shaft and sheave. There are no numbers stamped on the wheel. I would really like to get the oem part as I hate to try and match a non-oem and it not work correctly. Does the fact that it is a Greenheck II make a difference?? Do I need to talk to a different division of Greenheck? The website only shows the new products available and does not have any info on older models. Thanks for any help or direction.

[hvac_two]

I would advise that you try Greenheck again and offer to email digital image JPEG if there is a dispute. Often times if you hassle them enough they'll get the point.

[BobbyBJr]

Yeah, I hear that line the numbers aren't good all the time. I usually ask if they think I am just making them up or something, but after a bit of back and forth, they usually find it. I did have one local distributor actually come out on a job and write the numbers down himself, which magically worked although they were identical to what I had already given him. Go figure.

Bobby

[maxster]

check this section out on their site for leads http://www.greenheck.com/products/makeup/