CARRIER 30RB controls

[stanbyyourword]

Hello gents, Prodialog topic here, I was looking at two 30rb chillers yesterday master and slave on ccn setting between the two, While scrolling through the run hours I found master @94hrs and slave @14hrs, quite unbalanced , Then I started reading into the controls manual section on this , and it states that master will always run up first until a set# of hours in Service/Submenu , then will automatically swap master over to slave ,vice versa? correct?

1) is this parameter in USER2 submenu 5&6? "schedule clock" with a max number of hours @99?
also there is a reference to designating master/slave which will be the lead unit , but I dont see this param.??

2)I tried the default password 11, incorrect, wasnt sure how to enter this exactly correctly , I`m pretty good with Prodialog but never had to get in this far, both chillers need to be local/off mode? in USER2 par.11 password is changed? can this be accessed without entering the initial password?


thanks for responses , not an emergency just something I`m looking into ;) stan

[spinning wheel]

Maybe needs to be asked in pro forum

[chilbrig]

factory password is 1111

[Dallas Duster]

Stan can you post a picture of the Prodialogue panel?

[stanbyyourword]

[url]http://www.google.co.uk/imgres?start=181&um=1&hl=en&tbo=d&rlz=1C1CHIK_en-GBGB459GB462&tbm=isch&tbnid=LmcaYvmqQXWN2M:&imgrefurl=http://www.comronusedfreezers.com/en/products/productsdetails/cat/3/pid/657/cu/waterchillers/merk/carrier/pn/carrier_30gx267a_0063_air_cooled_water_chiller_.as px&docid=1YO_gTdhsk_uLM&itg=1&imgurl=http://www.comronusedfreezers.com/portals/24/images/product/DSCN6318.JPG&w=640&h=480&ei=pGnvUIDYMOiY1AWoqoDQCw&zoom=1&iact=hc&vpx=753&vpy=186&dur=262&hovh=191&hovw=255&tx=139&ty=60&sig=108417246815047084128&page=7&tbnh=138&tbnw=181&ndsp=28&ved=1t:429,r:6,s:200,i:22&biw=1366&bih=667[/url


Were these controls used in American market? stan

[Dallas Duster]

What the hell was that ????? The link didn't really work. We only have the Pro-dialog touch screen over here so far. Maybe someday we will get Pro-dialog +LCD and even Pro-dialog Pro someday. Who knows.



[url]http://www.google.co.uk/imgres?start=181&um=1&hl=en&tbo=d&rlz=1C1CHIK_en-GBGB459GB462&tbm=isch&tbnid=LmcaYvmqQXWN2M:&imgrefurl=http://www.comronusedfreezers.com/en/products/productsdetails/cat/3/pid/657/cu/waterchillers/merk/carrier/pn/carrier_30gx267a_0063_air_cooled_water_chiller_.as px&docid=1YO_gTdhsk_uLM&itg=1&imgurl=http://www.comronusedfreezers.com/portals/24/images/product/DSCN6318.JPG&w=640&h=480&ei=pGnvUIDYMOiY1AWoqoDQCw&zoom=1&iact=hc&vpx=753&vpy=186&dur=262&hovh=191&hovw=255&tx=139&ty=60&sig=108417246815047084128&page=7&tbnh=138&tbnw=181&ndsp=28&ved=1t:429,r:6,s:200,i:22&biw=1366&bih=667[/url


Were these controls used in American market? stan

[freonrick]

factory password is 1111

should be 0111

[stanbyyourword]

http://www.google.co.uk/imgres?start=181&um=1&hl=en&tbo=d&rlz=1C1CHIK_en-GBGB459GB462&tbm=isch&tbnid=LmcaYvmqQXWN2M:&imgrefurl=http://www.comronusedfreezers.com/en/products/productsdetails/cat/3/pid/657/cu/waterchillers/merk/carrier/pn/carrier_30gx267a_0063_air_cooled_water_chiller_.as px&docid=1YO_gTdhsk_uLM&itg=1&imgurl=http://www.comronusedfreezers.com/portals/24/images/product/DSCN6318.JPG&w=640&h=480&ei=pGnvUIDYMOiY1AWoqoDQCw&zoom=1&iact=hc&vpx=753&vpy=186&dur=262&hovh=191&hovw=255&tx=139&ty=60&sig=108417246815047084128&page=7&tbnh=138&tbnw=181&ndsp=28&ved=1t:429,r:6,s:200,i:22&biw=1366&bih=667

[stanbyyourword]

something went wrong with link after I edited post , sorry.

[Dallas Duster]

something went wrong with link after I edited post , sorry.

Thanks that's what I thought it looked like.

[chilbrig]

should be 0111

Your right. Wasn't thinking on that one.

[stanbyyourword]

damn I really thought these keypads were in usa ... :/

[Gibbo]

Service Menu is 88

[Dallas Duster]

Gibbo when are you going to become a professional member????



Service Menu is 88

[Gibbo]

Dallas my old son I don't think I am worthy of being in such fine company. :grin2:::grin2::grin2::grin2: