PDA

View Full Version : Lennox Duraglass Furnace



Admin
12-01-2006, 11:56 AM
From the site email


Regards,

Site Administrator

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~




Can you tell me how to light the pilot on a Lennox Duraglass Furnace? Mine went out and we are in the midst of a blizzard. I called our contractor and he hopes to get out sometime today but already lost 5 degrees. I am pretty handy but just don't know where the pilot is. Can you help?

Kathy

hvaclover
12-01-2006, 12:12 PM
Kathy

You have an oldy but goody there.

But to try to write the direction for you would be cumbersome and subject to misinterpretation. And I would not want to see you get hurt over a misread instruction I provided.

There should be lighting instructions on the area above the burners.

Try that.

It is against forum rules to go any further than I have already advised you.

Please let the tech you called take care of it safely.

mike3
12-01-2006, 08:35 PM
Does your local gas co make service calls? They may consider low temps an emergency and respond quickly