My heater's broke man......

[oroy54]

Fan motor wont blow. 120 on both legs. Its cold here.

[oroy54]

Had to draw a picture of it ,and label the wires.

[hvaclover]

Lose the ground at the service?

Or are you just goofin'?

[coolwhip]

Change that motor Roy, and dont let the smoke out of it.

[hvaclover]

I am so gullible...:mad:

[oroy54]

Cheryl's pig is cold.

[Furnace_dude]

Originally posted by oroy54
Cheryl's pig is cold.
tell her to put it in the oven. that'll warm it right up!!!

[oroy54]

Its not the motor. I have 110 on both leg but not 220 across each other. ?? Dig

[hvaclover]

Must be slow where you guys are, eh?

Looks like you're all getting bored.

[oroy54]

I'm not goofin this time. I know I tend to do that when I get bored.

[hvaclover]

:D

[Furnace_dude]

is this a heat pump or electric heat?

[oroy54]

Why dont you crawl in an oven yourself. You big ham.

[oroy54]

Heat pump

[Furnace_dude]

see if the fan will come on by putting the fan switch to on. or have you done this already?

[oroy54]

I'm a cold old dawg.

[Furnace_dude]

it could be the stat, transformer, lektricity, sequencer or wiring.

[coolwhip]

This is not a DIY site. Please call a licensed HVAC contractor in your area and have them fix it for you. :D

[oroy54]

We will see, when Cheryl gets home with that domaflacie, thing. :D Roy

[Furnace_dude]

oh sure kill the fun.

[oroy54]

I called them, remember Brown's A/C? Now I can tell them whats wrong.:D

[oroy54]

That part is not available anymore. Well what now? Niggaa rig it?

[a\c don]

Roy.
If you are reading 110 on each leg to ground but not reading 220 between them you either lost 1 leg of power to the air handler or the blower relay contacts are not closing.

[hvaclover]

A/cdon

I think they're just bored.

Heh, let'em play.

[oroy54]

It has been a pleasure messing with my a/c system. One more car, one more A/C system . I could tell you young boys. We can be goofs when we are old but not when we were young. Roy

[Edited by oroy54 on 12-01-2006 at 01:59 PM]

[oroy54]

I am really into cryogenic stuff myself. You are a good person. I enjoy your posts. Roy

[hvaclover]

:)

[opsmgr]

Been reading this post with interest and after consulting my charts i believe that it is the left falangie that need to be replaced after testing the polarity across both the left and right falangies

[oroy54]

Yep, that's right. Roy

[opsmgr]

Roy,
The best part is, I'm not even a technician, as my handle suggests, BUT, I did stay in a Holiday Inn last night