Delta Orcaview

[controlnut]

does any one have a copy of the control manual for Delta Orcaview. If so can you e-mail it to me.
Thanks
Vince

[sys_integrator]

I'm not sure what it is that you need. Are you looking for the operators manual or a technical manual? What are you trying to accomplish?

[controlnut]

sys_intergator: Iam looking for any info I can get my hands on. (operator or tech manuals) Iam working with a customer of mine and tring to get up to speed with the complete software package. I have 30 years in the control business but limited knowledge of Detla software. I can use any info you can get me.
Thanks
Vince

[sys_integrator]

Delta is really good about servicing their clients. If you go to the Delta Website and put in a request for the information you need, then I'm confident that you will get the info. Why can't you contact the dealer that installed the project? Is he out of business?

Regards,

[sys_integrator]

An after thought! If the customer has ORCAview, they should have the original software disk that came when the system was installed. Depending on how old the installation is, there is a chance that the manuals are on the original disk. The operator manual will certainly pe there. The technical manual and Illustrator may not be present.