View Full Version : Wanted York ISN Controls
11-13-2006, 09:04 AM
Looking for York Control Panel parts for LDC, EDC and other panels. Software as well. Working condition
11-16-2006, 06:54 PM
Are you serious, You know they junk some of the isn line, but we can dig up some, are you also intersted is some 24v/120 belimo actuators with 4-20ma and 0-10dc.
11-16-2006, 11:57 PM
Yes I am serious. Currently looking for EDC, LDC,and TDC panels or boards for same. Also hoping to find an installation disk (or two) for Facility Mananger software and security keys.
As far as Belimo actuators go, I have several installation projects going on with new control systems and will be placing an order for about 30 soon. All 24V 2-10. Valve and damper actuators. no 120.
For more info write me email@example.com.
11-21-2006, 02:30 PM
What rev ISN controls are you looking for? rev 6 or rev 7+?
11-22-2006, 01:50 PM
Basically I am looking for boards, I do not know the revs or if they matter on these board numbers
boards for EDC panel include FOM2 031-1-62-000. PSTC 031-01382-000, UIOC 031-01383-000, IPC 031-01381-002
LDC panel boards, APC 031-01384-003, IO card 031-385-000 and Key 024-25505-000
TDC board 371-02045-100
Also possiably a Facility Manager software and security key.
Thanks email is in profile.
11-25-2006, 03:55 PM
Guess there is not much of this stuff out there.
11-26-2006, 01:25 PM
York/Johnson has discontinued the product line, you can try to go your local York/Johnson branch and pay $$$$$$$$$$$$$ for replacement boards. You have REV 7 hardware which was late 90's and early 2000 they then went to rev 8 hardware. Your only hope is try to find some gear being removed or upgraded. I can get some REV 6 hardware and a little REV 7 hardware. The Facility manager key (dongle) will also have to come off an old project if you want I can keep an eye out.
Good luck, it's not a bad product
11-26-2006, 03:06 PM
Your right they have dropped the line. A couple of people that I installed these for in 99 and 2000 have asked me to try to help them since Johnson told them there are no parts avaiable and that they will have to change their system out for a new Johnson system. Some of these people need time to budget the money for a new system so I am trying to help them with the old until they are ready. They are willing to pay for some used good working parts, but it may be years before they can change out the whole system.
11-28-2006, 10:13 AM
let me know what you have I may be able to use the Rev 6
11-28-2006, 04:04 PM
I have about 50 TDC and 15-20 FDC rev 6 controllers
11-28-2006, 06:16 PM
At this time I can only use one of each. But there may be some interest to aquire more. My email is in the profile write me. see if we can work something out.
11-28-2006, 08:33 PM
please check your email
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.