I have a whole service truck parts inventory for sale...?

[spike]

Hey y'all, how's everyone been?

Been gone from here for awhile now...

The MS Gulf Coast is STILL destroyed, but we are just now starting to take a few small baby steps...

Could use y'all comments/suggestions on this one...

I'm sure there's a couple of y'all out there still who remember when I sold my resi service business awhile back...

My dilemma is - I've got a whole service truck inventory of brand new parts left over from the sale that I need to get rid of...

Normally, this would not be a problem here, some of my fellow business owner-buddies would take it of my hands...

But in this post-Katrina world we all still live in here, service work has all but ceased...

It's all new construction installs going on, that's it..

Would appreciate any suggestions y'all may have on how I can part with alot of good new parts, preferably all at once...

Reading over this it sounds kind of corny, but it's a shame to let all these good parts just sit here...

Thanks in advance Spike

[Green Mountain]

Originally posted by spike
Hey y'all, how's everyone been?

Been gone from here for awhile now...

The MS Gulf Coast is STILL destroyed, but we are just now starting to take a few small baby steps...

Could use y'all comments/suggestions on this one...

I'm sure there's a couple of y'all out there still who remember when I sold my resi service business awhile back...

My dilemma is - I've got a whole service truck inventory of brand new parts left over from the sale that I need to get rid of...

Normally, this would not be a problem here, some of my fellow business owner-buddies would take it of my hands...

But in this post-Katrina world we all still live in here, service work has all but ceased...

It's all new construction installs going on, that's it..

Would appreciate any suggestions y'all may have on how I can part with alot of good new parts, preferably all at once...

Reading over this it sounds kind of corny, but it's a shame to let all these good parts just sit here...

Thanks in advance Spike


spike, send me an inventory and I'll see what I can do.

[spotts]

Tools and Truck too?

[smokin68]

Ebay.

[spike]

Wow! You guys still don't miss a beat, do ya?

I'll have to get a fresh inventory this w/e...

Thanks, Benn...

And no, Jack , the van is gone. Sold it to a reefer man who didn't want my HVAC parts...

I thought about ebay, but, I'm probably the only person in the world who hasn't ebay-ed yet...

You guys are too much!

[dec]

Hummm so how long were the van and parts underwater before the water receded ???? lol

[frigetater]

where you live on the coast spike?

[spotts]

get that list?

[favoredwun]

Hi,

I'm a newbie getting started in business, and there are a few things I've been constantly going to the parts house for. Will you please send me the list as well?

Thanks in advance.

[spike]

the 'puters performace, not crash it...

ZoneAlarm upgrade, along with a family issue, caused my delayed response... Sorry...

OK, here goes...

REALLY prefer to do a bulk sale of the whole shootin match, and be done with it...

Not sure how to price a bulk sale like this...

I know (as do you) what these items cost...

Guess we'll play by ear...?

There's actually more than this, but they may have been used before (still good)... A TON of various sized orifices, and too many little things that add up, but not worth listing, they'll all be thrown in...

Fridge - I live in Gulfport...

Thanks everyone!


Hand Tools

1- Bostich stapler
1- Malco S3 Offset Seamer
1- Malco Andy Snips 14"
1- Malco SH3 sheet metal hammer
1- Malco Green Snips
1- Malco Yellow Snips
1- Regulator, Nitrogen, Victor
1- DMM, Fork, Amprobe, ADF200
1- Swedge Kit, Ritchie
Asst Miscellaneous Hand tools, pouches, amprobe analog (cheapy)

Parts

1- Motor, GE, 3585
1- Motor, GE, 3583
1- Motor, Rescue, Blower, 110v, 1/6-1/2hp
1- Motor, GE, Goodman OEM, 240, 1/4hp
1- Mount, Bellyband, universal
30'- 3/4" Sealtite Conduit Bulk
1- 45 x 440 run cap
1- 35/5 - 440 run cap
1- 50 x 440 run cap
2- 35 x 370 run cap
1- 40 x 370 run cap
1- 40/5 x 370 cap
1- 35/10 x 440 cap
1- 55/5 x 370 cap
1- 80 x 440 cap
1- 40/5 x 440 cap
2- 35/5 x 370 cap
1- 30/5 x 370 cap
3- GE 30/370V Capacitors
2- 10/370 Capacitors
3- 5/370 capacitors
1- 25/370 cap
1- 30+7.5/440V cap
1- Fan relay - Tempstar OEM
1- Fan relay - Steveco 90380
1- Fan relay - Steveco 90290
2- Fan relay - Diversitech 90340 relays
2- CB, SquareD 30A DP 240v
2 - CB, " 40A "
1- CB, " 60A " OEM for York/Luxaire AH
1- Potential Relay - Supco SUPR Universal
1- T-Stat, Robertshaw 9615 Digital
1- T-Stat, " 9420 "
1- T-Stat, " 9415 "
1- T-Stat, " 9600 "
1- T-Stat , Honeywell Y5949 1664 HP
2- T-Stat , W/R 1F57-306
1- T-Stat, W/R 1F56-444
1- T-Stat, Honeywell T-87
1- T-Stat, Honeywell T-87 subbase
1- Sequencer, Supco 4 stage
3- Sequencer, 2 stage
1- Sequencer, 1 stage
1- Time Delay, ICM, DOB fixed
1- TD, ICM, DOB, adj
1- TD, ICM, DOM, adj
1- TD, Rheem, 2-wire
1- Drain Pan Cut-off Float Switch
6- Transformers, 240/24v
1- Furnas 2P, 208/240V coil contactor 45EG20AG
2- Square D 3 PH contactor, 24V coil 8910DPA43V14
4- Supco 90380 Sequencers
3- Square D 3PH contactors 208/240V coil 8910DPA43V09
1- Square D DP contractor 110V coil 8910DP12V02
1- Furnas 3PH contactor 208/240V coil 42CE#5AEG106
4- Mars 90295 SPDT relays 240V coil
20- Asst 3" Cartridge fuses
2- 60A Square D DP CB
2- 40A SqD DP CB
1- SqD DP disconnect
1- 50A GE DP CB
1- 20A GE DP CB
1- 60A GE DP CB
2- 40A GE DP CB
1- 15A SP CB
2- 24" flex NG connectors
1- 30" flex NG connector

ACR

2- 1 1/8" Street Ells, 90
2- 1 1/8" Ells, 90
1- 1 1/8" Ell, 45
6- 1 1/8" coupling
5- 7/8" Ells, 90
5- 7/8" Ells, Street, 90
12- 7/8" Ells, 45
20- 7/8" couplings
7- 3/4" Ells, 90
1- 3/4" Ell, street, 90
5- 3/4" Ell, 45
2- 3/4" Ell, street, 45
7- 3/4" coupling
1- 3/8" Danfoss checkvalve
3- 1/2" ells, 90, street
7- 1/2" coupling
1- 1/2" ell, 45
6- 5/16" couplings
6- 5/16" ells, 90
1- 5/16" ell, 90, street
1- 5/16" ell, 45
7- asst reducers
3- 3/8" ells, 90, street
7- 3/8" T's
2- 3/8" coupling
10- 3/8" ells, 90
1- Alco 1/2" LLD, sweat EK34S
1- KMP 3/4" SLD, sweat WSL306S
1- Alco 3/8" LLD, sweat EK164S
1- Alco 3/8" LLD, SAE, EK164
1- Parker 7/8" Hi Acid, SLD13, sweat
1- Sporlan RCVE TXV, 2 ton
1- Parker 5/8" Hi Acid, SLD85SVHH

5- 3/4" sealtite connectors
2- 3/4" sealtite connectors, 90
2- 1/2" sealtite connectors, 90
15- Romex connectors, reducers, asst'd sizes

3dzn- Fittings, PVC, asstd

1- Nordyne universal HS igniter 902661
1- Honeywell HS igniter Q3400A1040
2- Residential CO detectors
8- Asst'd defrost and furnace circuit boards (used, but still good in box)
1- T-Stat Lock Box




[Edited by spike on 11-20-2006 at 12:40 PM]

[high plains]

Any idea how much you want for everything?

Are you willing to ship?


I am interested depending on price.


Matt

[spike]

Of course willing to ship...

$2,350 is a conservative estimate of what I paid for these items...

Y'all take it from there...

Thanks.

[r2]

spike,

do you still have the nitrogen regulator and swedge kit?
how much do you want for them?
sent me an e-mail art2 at mail2world dot com

[jet air]

Do you still have the inventory? How far are you from Houston? Atlanta. I live in metro Atlanta and have a friend who occaisionally travels from Houston. If you have the inventory I will check with my learned friend for pricing offer.

[ga-hvac-tech]

Hi Spike,

THX for posting the inventory. You have lots of stuff there, some of it I could use and some of it would probably be truck stock for a year or more until it found a home... :)

Please contact me at:

Home dot Service at CHS-Inc dot net

THX!

GAhvacTech

[spike]

for picking up the hand tools and ACR fittings!....

So, this is what I still have...

1- Swedge Kit, Ritchie
1- Motor, GE, 3585
1- Motor, GE, 3583
1- Motor, Rescue, Blower, 110v, 1/6-1/2hp
1- Motor, GE, Goodman OEM, 240, 1/4hp
1- Mount, Bellyband, universal
30-' 3/4" Sealtite Conduit Bulk
1- 45 x 440 run cap
1- 35/5 - 440 run cap
1- 50 x 440 run cap
2- 35 x 370 run cap
1- 40 x 370 run cap
1- 40/5 x 370 cap
1- 35/10 x 440 cap
1- 55/5 x 370 cap
1- 80 x 440 cap
1- 40/5 x 440 cap
2- 35/5 x 370 cap
1- 30/5 x 370 cap
3- GE 30/370V Capacitors
2- 10/370 Capacitors
3- 5/370 capacitors
1- 25/370 cap
1- 30+7.5/440V cap
1- Fan relay - Tempstar OEM
1- Fan relay - Steveco 90380
1- Fan relay - Steveco 90290
2- Fan relay - Diversitech 90340 relays
2- CB, SquareD 30A DP 240v
2- CB, " 40A "
1- CB, " 60A " OEM for York/Luxaire AH
1- Potential Relay - Supco SUPR Universal
1- T-Stat, Robertshaw 9615 Digital
1- T-Stat, " 9420 "
1- T-Stat, " 9415 "
1- T-Stat, " 9600 "
1- T-Stat , Honeywell Y5949 1664 HP
2- T-Stat , W/R 1F57-306
1- T-Stat, W/R 1F56-444
1- T-Stat, Honeywell T-87
1- T-Stat, Honeywell T-87 subbase
1- Sequencer, Supco 4 stage
3- Sequencer, 2 stage
1- Sequencer, 1 stage
1- Time Delay, ICM, DOB fixed
1- TD, ICM, DOB, adj
1- TD, ICM, DOM, adj
1- TD, Rheem, 2-wire
1- Drain Pan Cut-off Float Switch
1- Furnas 2P, 208/240V coil contactor 45EG20AG
2- Square D 3 PH contactor, 24V coil 8910DPA43V14
4- Supco 90380 Sequencers
3- Square D 3PH contactors 208/240V coil 8910DPA43V09
1- Square D DP contractor 110V coil 8910DP12V02
1- Furnas 3PH contactor 208/240V coil 42CE#5AEG106
4- Mars 90295 SPDT relays 240V coil
20- Asst 3" Cartridge fuses
2- 60A Square D DP CB
2- 40A SqD DP CB
1- SqD DP disconnect
1- 50A GE DP CB
1- 20A GE DP CB
1- 60A GE DP CB
2- 40A GE DP CB
1- 15A SP CB
2- 24" flex NG connectors
1- 30" flex NG connector
1- 3/8" Danfoss checkvalve
1- Alco 1/2" LLD, sweat EK34S
1- KMP 3/4" SLD, sweat WSL306S
1- Alco 3/8" LLD, sweat EK164S
1- Alco 3/8" LLD, SAE, EK164
1- Parker 7/8" Hi Acid, SLD13, sweat
1- Sporlan RCVE TXV, 2 ton
1- Parker 5/8" Hi Acid, SLD85SVHH
5- 3/4" sealtite connectors
2- 3/4" sealtite connectros, 90
2- 1/2" sealtite connectors, 90
15- Romex connectors, reducers, asst'd sizes
3dz- Fittings, PVC, asstd
8- Asst'd circuit boards (used, but still good in box)
1- T-Stat Lock Box

Anyone, anyone...?

Thanks spike

[rjb7112]

sounds like the parts van I need to have , I dont use alot of the stuff either but it has been hot on these items latley, who do you have marketing you lol