mdharris68
10-18-2012, 10:13 AM
First of all, I hope that is all of the model number.
Second, can anyone tell me how they hold up the griddle portion of the unit? I have a set of these that are made as one on a steel frame, and one of the griddles is tilting towards the back corner opposite the drain corner. I think the hood cleaners must of stood on it. I am going to take off the front burner cover at 2:00 today when it is cool and see if there is anything obvious that is bent. I measured the suspect corner and it is lower than the respective corner of it's mate.
I researched the vulcan website and didn't find any manuals for this unit and have not heard back from tech support. Any help appreciated.
Thanks, mdharris68
Second, can anyone tell me how they hold up the griddle portion of the unit? I have a set of these that are made as one on a steel frame, and one of the griddles is tilting towards the back corner opposite the drain corner. I think the hood cleaners must of stood on it. I am going to take off the front burner cover at 2:00 today when it is cool and see if there is anything obvious that is bent. I measured the suspect corner and it is lower than the respective corner of it's mate.
I researched the vulcan website and didn't find any manuals for this unit and have not heard back from tech support. Any help appreciated.
Thanks, mdharris68