View Full Version : Trane VCEF VAV Controller D.D.C.\UCM
10-19-2006, 01:52 PM
Trane VCEF VAV Controller D.D.C.\UCM
I need to connect and check due to problems with low Air flow and not allowing Electric heat to enable. I need help accessing this controller and materials needed, software needed. I do have controls experience programming and commissioning other brands, hope I can follow your support.
10-19-2006, 06:58 PM
You need to buy Rover software to connect.
Check the pressure transducer and tubing is most likely cracked.
10-20-2006, 06:58 AM
I have called Trane to see if they will sale it to me. Is there another place to get the software other when getting my customer to order it?
10-20-2006, 09:00 PM
As a contractor you are entitled to purchase it. Company policy.
10-23-2006, 08:40 AM
Thatís good news thanks for your time and knowledge.
Is Rover compatible with the newer Trane systems and can you use it to login to remotely?
duke of earl
10-23-2006, 05:07 PM
I purchaded Rover about a year ago which was the contractors version and it would not do com 3/4, only a watered down com 5.Go figure.
11-10-2006, 07:33 PM
Rover will work, put you must update you software monthly on trane.net
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.