PDA

View Full Version : Any opening for a Conrols Engineer?


scottbalan
10-03-2006, 07:26 AM
I was wondering if anybody knew of any opening in
DDC Controls Engineering. I have my Masters in Mechanical Engineering with Controls as my specialization. Any information leading to a job would be appreciated.
crab master
10-03-2006, 10:10 AM
Check out

http://www.hvacagent.com/

or

http://www.mepatwork.com/?cd=jobs&gclid=CN-Iu9uK3YcCFSaBYAodAy7mlg
codewriter
10-03-2006, 04:29 PM
Sure, move to the Wash DC area, I will put you to work.
theoldman
10-04-2006, 02:35 AM
How many years of control engineering experience do you have, and do you have any field programming/start-up experience?
lon man
10-05-2006, 08:18 AM
Move to California. I have a need for a Controls Engineer.

Lon Man
Irishmist
10-05-2006, 08:28 AM
I would also ask if you had field experience or has it been just on the design / engineering side? And, more importantly are you planning to remain in the office / field? All the best, John. There may be opportunities in your own back yard you are not aware of.
enecp
10-05-2006, 11:26 AM
If you're interested in working in the Boston area,
we are looking also.
Send an email to sjoanis@enesystems.com

Good luck!

BTW - looking at your profile, you'd fit right in - the engineering group here are all pilots (aviation)


[Edited by enecp on 10-05-2006 at 11:38 AM]
ccnman
10-16-2006, 08:11 PM
the boston area has need for controls engineers
pideedoff
10-16-2006, 08:25 PM
Sure, Move to So Cal and we'll hire you!
ddcmam
10-17-2006, 07:13 PM
Sure move to TN
comfortmaster1
10-20-2006, 07:53 PM
Originally posted by codewriter
Sure, move to the Wash DC area, I will put you to work.

I do controls work around the beltway.