Pics Of The Van

[ryan1088]

So many threads about how messy our vans get out there so I figured I'd post some of mine after moving to a van with shelving. 20+ man hours later and I think everything is pretty well setup.

Back door, a bit of clutter.
306981


Side door.
306991

Stanley tool boxes with tool pouches in order.
307001

And a wire spooler, of course.
307011

[truck12]

Looks great since you just moved in. Take a pic in the middle of a very busy week in the middle of a call a year from now.

[ryan1088]

Oh trust me I know it will get messy but before I didn't have any refrigerant racks or shelves of any kind. The only storage devices we had were milk crates....

[Iceman7997]

Are refrigerant cylinder racks a generally new concept cause I don't know how you could live with out them. I guess I am asking have they been around since the cylinders were transported around or were they kept in their boxes? Ryan, that van looks like a well stocked and to some people messy and disorganized if they do one call a week? Are you mainly service cause the wire spools are great for installs but for service? Not knocking it as my van is embarrassing at the moment, as I'm waiting for a slow rainy day to pull it in the shop. I is that a Ford? The shelves we have had in the past had to be secured to the floor and tank racks due to them collapsing, and it didn't have anything to do with the fact they were overstocked and my sharp turns. Hahaha

[jackintheboxtec]

Dosent look to bad.
If you get a small roll-a-way for the tools you dont keep in your tool pouch and mount it where your torch set is then you can free up more floor space wont look so cluttered.

[ryan1088]

No offense taken Ice. I do all of our refrigeration work and a/c work. We carry NO refrigeration parts in our inventory along with very few quantities of assorted things.

I also do a lot of projects, like tomorrow we are doing a changeout on a walk-in fridge. Also I have been putting in a water proving safety switch for all of our water cooled refer condensing units. That's where all the wire came from!

[Dchappa21]

Is that a can of r-12 in there?

[Iceman7997]

No refrigeration parts but you provide 24 /7 service right? I have to admit having at least some inventory (valve plates, pressure controls, time clocks etc...) would take the pressure off your refrigeration guy with the sweet van haha

[ryan1088]

It is r-12, actually changing an old 12 evaporator tomorrow. I carry 12, 502, 404, 410, and of course 22. I go on call 3 times a year but I hate having to "rig" something cause we don't have it. Just started accumulating parts and there you have it!

[coolwillis]

Looks like the van of a man that works

[pecmsg]

And I thought I was the only one that had 12 in the truck.

[Jyoti mattu]

All these pics are good but they are too little. That's why i can't see there content properly. Please post big size image so that i can easily see the all parts of Van.

[canusayinsanity]

I can see them quite well, just click on them lol

[austinsaysay]

I just started driving a van for a company that just recently hired me. I have also driven another van for a previous employer. But through my expiriences, i am stil a pick up truck man. Despite what many assume, i can be as or better equipped than any van out ther and still load up a split system in the back of my truck after a crazy week of installing and still be better organized than most. Haters gonna hate

[supertek65]

Looks good ryan!

[ryan1088]

I just started driving a van for a company that just recently hired me. I have also driven another van for a previous employer. But through my expiriences, i am stil a pick up truck man. Despite what many assume, i can be as or better equipped than any van out ther and still load up a split system in the back of my truck after a crazy week of installing and still be better organized than most. Haters gonna hate

To each his own. I don't care for a truck myself because of the weather. If I need something hauled, chances are good I need help getting it out and installed so I recruit help to do that!

[ryan1088]

Looks good ryan!

Thanks dude! You guys doing any work our way or are you all done putting in rooftops that none of us have any idea how to work on?

[Phrancis]

If you have too many spare parts on hand you could always upgrade to something like this :angel:

308071

[supertek65]

We are never done there!






Thanks dude! You guys doing any work our way or are you all done putting in rooftops that none of us have any idea how to work on?

[ryan1088]

Like what?!