View Full Version : Trane Compressors
gear head monk
09-12-2006, 06:11 AM
I want to inquire if you have data sheets for TRANE COMPRESSOR. Tonnage would be at 15, 20 and 30. We are trying to create a comparative analysis against dansfoss.
Thanks in advance..
The Saint
09-12-2006, 06:47 AM
http://www.trane.com/Commercial/Equipment/ProductLine.aspx?pl=82
http://www.trane.com/commercial/equipment/ProductDetails.aspx?prod=9
[Edited by The Saint on 09-12-2006 at 06:51 AM]
esornivram
09-15-2006, 03:26 AM
its really not the compressors its the System thats is generating conditions that may be self destructive
1 inproper start up,( third party contractors sets, elect powers up they flip switch and NEVER look back, however i also found good set ups with stable ops and still compressor blowing the terminals out.
example KEANE NH. its usually 80 ish for highs, units hardly ever loaded,10 units 2o ton each plus 5 ton and 3 7.5 tons office units
why does five compressors blow terminals out, number five while i was there coils in good condition. the heaters well they been used alot, no exterior explan for these, 2002 models
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.