PDA

View Full Version : haire



brannen
08-21-2006, 09:09 PM
ok i have 2 questions How good quailty is a haire i just installed one at a house 2 1/2 ton straight cool? and what size wire do i really need to use on the conderson does it really matter and what is a double pole 60 break fine to use?

smokin68
08-21-2006, 09:14 PM
Are you sure you should be installing? You could be endangering people. Not good.

dnt
08-21-2006, 09:21 PM
Always understood that the installation quality is at least as important (if not more than) the quality of the equipment. How would you rank the installer on this project?

the dangling wrangler
08-21-2006, 09:53 PM
Try this novel idea kid, read the instruction manual,
BEFORE not after installing. And no, a 60 amp breaker is NOT ok for that size unit. Haier quality seems alright, I've installed 4 or 5. They seem alright. You need to do some engineering if you wanna put a hard start kit in the control box, though. No room.