starquilter
07-17-2012, 02:29 PM
I have to replace my Rheem furnace. I have 2 estimates: 1) is for a Rheem Model No. RGTM-07ERBGS , two stage with ECM Blower motor, 75000 BTU downflo propane furnace. This also includes a new A-Coil n cabinet to existing air conditioner which is a high efficiency Tappan whole house air condition.
The 2nd is for a Trane XV 95, two stage variable speed, 80000 BtU downflo propane furnace. They do not
new A- Coil.
My questions:
How do these units compare with each other?
What would be the unit you would choose to heat approximately 2000 sq. ft.?
I am at a loss as to what to do. One unit is quite expensive although it can receive 50% off with government funding. The other unit does not receive any funding but is more reasonably priced n includes the A-coil and complete installation including new propane line n tank.
I am a widow, on a fixed income, who wants not to worry about heating n cooling my home.
Thanks for your help
The 2nd is for a Trane XV 95, two stage variable speed, 80000 BtU downflo propane furnace. They do not
new A- Coil.
My questions:
How do these units compare with each other?
What would be the unit you would choose to heat approximately 2000 sq. ft.?
I am at a loss as to what to do. One unit is quite expensive although it can receive 50% off with government funding. The other unit does not receive any funding but is more reasonably priced n includes the A-coil and complete installation including new propane line n tank.
I am a widow, on a fixed income, who wants not to worry about heating n cooling my home.
Thanks for your help